Datamax O'Neil H-8308P Manual del operador Pagina 48

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 116
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 47
39
b.
User Media
If media setup files have been stored internally or on a USB mass storage device connected to
the USB host, the files can be selected from this interface.
Using the up and down buttons, highlight the file and then select the green Check button.
Note: The first tab displays files that have been saved internally. The second tab displays files
from the mass storage device attached to the USB host. User files may be printed by selecting
the print button in the taskbar.
Note: Further details are available in the Advanced section of the menu. Please refer to
the
Advanced section of the manual for more information.
c.
Select Type
For print media types that have not been qualified by the printer manufacturer, the Select Type
option allows the user to manually enter the media and ribbon types. This will configure the
printer to the approximate print settings.
The interface has three tabs:
Paper - Using the up and down arrows, highlight the appropriate paper to be used.
Ribbon - Using the up and down arrows, highlight the appropriate ribbon to be
used.
Settings - Choose the appropriate settings for your media and ribbon types.
Note: Fine adjustments to print settings may be required to improve print quality. The Select
Type utility is designed to approximate the print settings.
Paper Sensor Type
Print media contains distinctive characteristics and those characteristics must be accounted for
in the settings to ensure finding Top-of-Form.
Select from the following options:
Paper Sensor Type
Paper Sensor Side
Gap
Inside
Outside
Mark on Bottom
Inside
Outside
Notch
Inside
Outside
Continuous
Inside
Outside
Ribbon Mode
The Ribbon Mode option allows the user to enable and disable Ribbon Mode and notes the type of
ribbon being used.
Ribbon Mode has three settings:
Coated In (CSI) - for thermal transfer printing
Vista de pagina 47
1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 115 116

Comentarios a estos manuales

Sin comentarios