Datamax O'Neil H-8308P Manual del operador Pagina 20

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 116
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 19
11
D. If loading media for the first time, or if switching media types, widths or configurations,
position the Media Sensor as detailed in Section 3.2; otherwise, go to Step E.
!
If loading thermal transfer media, also load ribbon; see Section 3.3.
E. Lower the Printhead Assembly then rotate the Printhead Latch completely clockwise.
F. Close the cover. With READY displayed, press the FEED Key until at least one gap (or
mark) advances.
!
If your media is less than the width of the printhead, adjust the Leveling
Cam; see Section 5.4.1.
Vista de pagina 19
1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 115 116

Comentarios a estos manuales

Sin comentarios