Datamax O'Neil H-8308P Manual del operador Pagina 22

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 116
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 21
13
E. If loading media for the first time, or when switching media types, widths or
configurations, position the Media Sensor as detailed in Section 3.2; otherwise, go to
Step F.
!
If loading thermal transfer media, also load ribbon; see Section 3.3.
F. Lower the Printhead Assembly then rotate the Printhead Latch completely clockwise.
G. Close the cover. With READY displayed, press the FEED Key until at least one gap (or
mark) advances.
!
If your media is less than the width of the printhead, adjust the Leveling Cam; see
Section 5.1.1.
Vista de pagina 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 115 116

Comentarios a estos manuales

Sin comentarios