Datamax-oneil S-Class User Guide Manual de usuario descargar pdf (Pagina 49)

S-Class 41

4.4.1 Printhead Cleaning

Declining print quality (for example, streaking or smudging) is usually

caused by a surface build-up of dirt on the printhead; see Section 3.5.2. If

left unattended, this build-up can lead to permanent printhead damage.

Clean the Printhead as follows:

 Turn ‘Off’ and unplug the printer. (ST Models: Raise the access

cover; see Section 3.2.)

 Slide the Printhead Latch to the ‘Unlocked’ position and then raise

(or, in the case of SV Models, lower) the Printhead Assembly.

 Using a cotton swab dampened

with isopropyl alcohol gently wipe

the Printhead surface, paying close attention to the Burnline,

cleaning until all build-up is removed.

CAUTION

NEVER use a sharp object to clean the Printhead. Damage can

result.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 91 92

Sin comentarios

Datamax-oneil S-Class User Guide Manual de usuario Pagina 49