Datamax-oneil MP Compact4 Mark II Cutter Option Manual de usuario descargar pdf (Pagina 4)

Setup and Loading

By default the cutter is set to operate automatically every time a label is printed out. It will cut between

each label.

Host configuration utilities such as DMXConfig and Tera Term can be used to adjust the feed and reverse

feed rate and if needed, to adjust the cutting position. The cutting function can also be changed to cut on

command instead of automatically.

1. Set the lever to release.

2. Pull out the locking screw to open the

cutter.

3. Load the media from the side and

then through the cutter.

4. Lock the cutter to the printer again

and set the lever to print.

1 2 3 4

Sin comentarios

Datamax-oneil MP Compact4 Mark II Cutter Option Manual de usuario Pagina 4