Datamax-oneil H-Class Operator’s Manual Manual de usuario Pagina 28

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 180
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 27
18 H-Class
E. If loading media for the first time, or when switching media types, widths, or
configurations, position the Media Sensor as detailed in Section 3.2; otherwise, go to
Step F.
If loading thermal transfer media, also load ribbon; see Section 3.3.
F. Lower the Printhead Assembly then rotate the Printhead Latch completely clockwise.
G. Close the cover. With READY displayed, press and hold the FEED Key until at least
one gap (or mark) advances; see Section 3.4.
If your media is less than the width of the printhead, adjust the Leveling Cam; see
Section 5.4.1.
Vista de pagina 27
1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 179 180

Comentarios a estos manuales

Sin comentarios