Datamax-oneil APEX 4 User Guide Manual de usuario descargar pdf (Pagina 19)

3.5 Bluetooth Communications

•

For Bluetooth operation: Dip Switch #1 must be in the <OFF> position. Dip Switch #2

must be in the <ON> position.

Note: Adjust baud rate settings to match those of the Bluetooth module in your computing

device.

• The printer can be powered up by pressing the power <ON/OFF> switch.

• Pressing the power <ON/OFF> switch again will turn the printer <OFF>.

Note: It is necessary for the mobile computing device you are using to discover and pairing the

printer to establish Bluetooth communication.

Note: Systems Integrators: Refer to the Bluetooth manual provided with your mobile computer

and the Bluetooth section of the APEX 4 Developer’s Manual

3.6 802.11 Communications (Option)

•

For 802.11g operation: Dip Switch #1 must be in the <OFF> position. Dip Switch #2

must be in the <ON> position.

Note: Adjust baud rate settings to match those of the 802.11 module in your computing device.

• The printer can be powered up by pressing the power <ON/OFF> switch.

• Pressing the power <ON/OFF> switch again will turn the printer <OFF>.

Note: It is necessary that the 802.11b/g settings match the settings of your wireless network

(Infrastructure or Ad-Hoc mode). Refer to the instructions provided by the network

administrator.

Note: Systems Integrators: Refer to the Developer’s Manual for a detailed description of the

default Wi-Fi settings of the APEX 4.

3.7 Serial RS232 (Option)

•

All Dip Switches must be in the <OFF> position.

• The printer can be powered up by pressing the power <ON/OFF> switch.

• The standard communication speed is 115200 bps. Refer to Table 2 for a description of

the bit parity settings.

• Pressing the power switch again will turn the printer <OFF>.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 29 30

Sin comentarios

Datamax-oneil APEX 4 User Guide Manual de usuario Pagina 19