Datamax O'Neil H-4310X Manual del operador descargar pdf (Pagina 100)

90 H-Class

5.3.2 Level One Reset

Level One reset returns the factory default settings, or if saved a Factory Setting File. To

perform a Level One Reset:

• Select SET FACTORY DEFAULTS in the menu; see Section 4.2.4.

5.3.3 Level Two Reset

Level Two reset returns the printer to the firmware default settings and clears all

parameters. To perform a Level Two Reset:

• While turning ON the printer, press and hold the three Soft Keys (see Section 4.1)

until the SYSTEM RESET message flashes.



Calibration will be required; see Section 5.2.

5.4 Printhead Assembly Adjustments

Printhead Assembly Adjustments permit the mechanical compensation sometimes needed to

maintain print quality across the wide range of media types and sizes. The applicability and

adjustment methods for the printhead are described below.

5.4.1 Leveling Cam Adjustment

Whenever using narrow media (sizes that are less than the width of the printhead), adjust

the Leveling Cam for even pressure distribution.



If changing media sizes, readjust the Leveling Cam.

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 179 180

Sin comentarios

Datamax O'Neil H-4310X Manual del operador Pagina 100