Datamax-oneil M-Class Mark II RFID Option Manual de usuario descargar pdf (Pagina 5)

Set the Printer

RFID default settings (listed below by encoder [MODE] type) can be modified via the Control Panel:

 HF RFID Default Settings (MODE = HF):

RFID POSITION = 1.1

TAG TYPE = ISO 15693

RETRY ATTEMPTS = 3

 UHF RFID Default Settings (MODE = UHF):

RFID POSITION = 1.1

TAG TYPE = GEN 2

TAG DATA SIZE = 96-BIT

RETRY ATTEMPTS = 3

Change an RFID default by selecting, modifying, and saving the desired setting(s):

Step Instruction Display

Press MENU.





Using the DOWN Button, scroll to PRINTER OPTIONS and then

press ENTER.





Scroll to RFID and then press ENTER.





Scroll to the setting to be modified (for example, RETRY ATTEMPTS)

and then press ENTER.





Enter the desired setting, and then press ENTER. An asterisk will

appear next to the setting.





Press ESC; and, at the SAVE CHANGES prompt, press ENTER

complete the setup.







Notes: (1) If NOT INSTALLED is displayed after selecting RFID, the wrong device may be enabled;

go to the MODE setting and ensure that the correct RFID device has been selected.

(2) To restore factory defaults, select SET DEFAULTS in the RFID options menu.

1 2 3 4 5 6 7 8

Sin comentarios

Datamax-oneil M-Class Mark II RFID Option Manual de usuario Pagina 5