Datamax-oneil LP3 LABEL PRINTER User Guide Manual de usuario descargar pdf (Pagina 15)

ETTING

OUR

RINTER

Printing a Self-Test

1. Press and hold the power button for approximately three (3)

seconds until printing begins. For information on button

functions, see

Using the Control Panel on page 15

2. After printing begins, release the power button.

Connecting the Printer

The LP3 is designed to transmit and receive data from a host

terminal. The host terminal may be your computer, handheld, or

laptop. Communication can occur by using a data cable to

connect the printer and the host terminal.

Installing a Data Cable

1. Before connecting your printer to a host terminal, verify your

printer's settings. For more information, see

Printing a Self-

Test on page 12

2. Turn off the printer.

3. Insert the data cable's plug into your printer's data port

(Figure 29).

4. Connect the data cable to the host and/or device you are

using.

Note: When printing a self-test, use standard 3 inch receipt

media without Q-Marks to show all printed data.

Figure 29

Data port

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 27 28

Sin comentarios

Datamax-oneil LP3 LABEL PRINTER User Guide Manual de usuario Pagina 15