Datamax O'Neil Mark III E-4305A Manual del operador descargar pdf (Pagina 17)

Chapter 2 – Printer Setup 11

The printer is capable of using C.S.I (Coated Side In) and C.S.O (Coated Side Out) ribbons in the following

configurations:

½” Core Ribbons

Ribbon Core Width: 4.3 inches (110mm)

Ribbon Width: 1.0 - 4.3 inches (25 - 110mm); Centered on core

1” Core Ribbons (with Ribbon Core Adapters, see section 2.4.1.)

Ribbon Core Width: 1.0 - 4.3 inches (25 - 110mm); Centered

on Ribbon Core Adapters

Ribbon Width: 1.0 - 4.3 inches (25 - 110mm); Centered on core

Load ribbon as follows:



If equipped with the thermal transfer option, the printer is factory set to use ribbon; see Section 3.4 to

change this setting if using direct thermal media.

1) Determine the type of ribbon (C.S.I or C.S.O) you are using.

312

C.S.I Coated Side In Ribbon

C.S.O Coated Side Out Ribbon



Ensure the inked side of the ribbon faces toward the label media, not the printhead.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 57 58

Sin comentarios

Datamax O'Neil Mark III E-4305A Manual del operador Pagina 17